Table of Contents
Advertisement
Playing CDs
1
Press the Open/Close [ ] button to open the
disc tray.
2
Place the CD on the tray with the label-side
facing up.
Place 8 cm CDs in the center of the tray.
3
To start playback, press the Play [
button.
The disc tray closes and playback starts.
The Play
indicator appears.
To stop playback:
Press the Stop [ ] button.
To pause playback:
Press the Pause [ ] button. The Pause
appears. To resume playback, press the Pause [ ] or
Play [
] button again.
To Fast-Forward or Fast-Reverse
During playback or while playback is paused, press
and hold the Fast Forward [
forward, or the Fast Reverse [
reverse.
To remove the CD:
Press the Open/Close [ ] button to open the disc
tray.
• Audio CD Display
Total number
of tracks
(Actual display depends on country)
• MP3/WMA CD Display
Total number
Total number
of folders
of files
(Actual display depends on country)
Selecting Tracks
To return to the beginning of the track currently
playing, press the Previous [
Press the Previous [
] button repeatedly to select
earlier tracks.
• While playback is stopped, pressing the Previous
[
] button will select the previous track.
Press the Next [
] button to select subsequent
tracks.
]
indicator
] button to fast
] button to fast
"TOTAL" lights up.
Total playing time
Disc name or Format
] button.
Displaying CD Information
During playback, press the remote controller's
[DISPLAY] button repeatedly to display the following
CD information.
• Elapsed time
• REMAIN
Lights up while the remaining track time is being
displayed.
• TOTAL REMAIN
Lights up while the remaining disc time is being
displayed.
The total time is more than 99 minutes and 59 seconds,
"– –:– –" is displayed.
Selecting Files (MP3/WMA)
There are two modes for selecting files (MP3/WMA
files): Navigation mode and All Folder mode.
In Navigation mode, you can select files (MP3/WMA
files) by navigating through the folder hierarchy, moving
in and out of folders and subfolders.
In All Folder mode, all folders appear at the same level,
making it easy to select folders regardless of the
hierarchy.
In this manual, MP3/WMA files are referred to as
files. Likewise, folders (directories) are referred to as
folders.
Note:
• If you don't select a specific MP3/WMA file or folder
for playback, all of the MP3/WMA files on the disc
will be played in numerical order starting with file #1.
Selecting Files in Navigation Mode
This mode can only be used while playback is stopped.
1
While playback is stopped, press the Stop
[ ] button.
The CD receiver enters Navigation mode and
"[Root]" appears on the display.
2
Press the Play [
] button.
The name of the first folder one level down from root
appears on the display.
If the disc contains no folders, the first file name
appears.
3
Use the Previous and Next [
buttons to select other folders and files at
the same level.
]/[
]
19
Hide quick links:
Advertisement
Chapters
Table of Contents
