Service Processor Error Codes - IBM 8670M1X User Manual

Note: See "System" on page 116 to determine which components a field service technician should replace.
Error code/symptom
00180500
(PCI option ROM checksum error)
00180600
(PCI to PCI bridge error)
00180700, 00180800
(General PCI error)
00181000
(PCI error)
01295085
(ECC checking hardware test error)
01298001
(No update data for microprocessor 1)
01298002
(No update data for microprocessor 2)
01298101
(Bad update data for microprocessor 1)
01298102
(Bad update data for microprocessor 2)
I9990301
(Hard disk sector error)
I9990305
(Hard disk sector error, no operating
system installed)
I9990650
(AC power has been restored)

Service processor error codes

When viewed from POST, service processor error codes will appear in hexadecimal
form (generally beginning with A2, A3, A4, A5, A6, A7, AD, AE, or E1). However,
when viewed from the system-error log, the messages will appear as text. To
determine a possible error condition for the service processor, see the system-error
log (see "Viewing error logs from diagnostic programs" on page 28).
FRU/action
1. Remove failing PCI card.
2. System board.
1. Run the Configuration/Setup Utility program.
2. Move the failing adapter to slot 1.
3. Failing adapter.
4. System board
1. System board
2. PCI card
1. Adapter
2. System board
1. System board
2. Microprocessor
1. Ensure all processors have the same cache size.
2. Microprocessor 1.
1. Ensure all microprocessors have the same cache sizes, clock
speeds and clock frequencies.
2. Microprocessor 2.
1. Ensure all microprocessors have the same cache sizes, clock
speeds and clock frequencies.
2. Microprocessor 1.
1. Ensure all microprocessors have the same cache sizes, clock
speeds and clock frequencies.
2. Microprocessor 2.
1. Hard disk drive
2. SCSI backplane
3. Cable
4. System board
Install operating system to hard disk.
1. Check cable.
2. Check for interruption of power.
3. Power cable.
Chapter 6. Symptom-to-FRU index
107