5. Disconnect the cables from the power supply to the system board and all
6. While you support the power-supply, remove the three screws from the pivot
7. If you are instructed to return the power supply, follow all packaging instructions,
80
System x3400 M2 Types 7836 and 7837: Installation and User's Guide
internal components. Be sure to make a note of the cable routing.
Attention:
Support the power supply while you remove the mounting screws.
After the screws are removed, the power supply is loose and can damage other
components in the server.
bracket that secure the power supply to the chassis; then, lift the power supply
off the chassis. Save the screws to use when you install the replacement power
supply.
and use any packaging materials for shipping that are supplied to you.