Table of Contents
Advertisement
4. Unlock the left-side cover.
5. Remove the left-side cover (see "Removing the left-side cover" on page 36).
6. Rotate the power-supply cage assembly out of the chassis. Lift up the
7. Remove the air baffle (see "Removing the air baffle" on page 42
44
System x3400 M2 Types 7836 and 7837: Installation and User's Guide
Note: Be careful and do not drop the server.
power-supply cage handle and pull the power-supply cage assembly all the way
up until the retainer latch locks the cage in place on the chassis.
Note: It might be easier to remove the air baffle if you lift up the tab that is over
the DIMMs in the rear of the server.
Advertisement
Table of Contents
