Table of Contents
Advertisement
15. Connect one end of the tape drive signal cable to the tape drive and the other
62
System x3400 M2 Types 7836 and 7837: Installation and User's Guide
Optical power cable
SATA connector
Power converter
cable
Tape drive
end to the connector on the system board. Route the cable through the plastic
slots on the bottom of the chassis underneath the fan cage assembly as
shown in the following illustration:
Optical drive
power cable
connector
See "Power and signal cables for internal drives" on page 69 for more cabling
information.
USB signal
cable connector
USB signal
Optical drive
cable
power cable
SATA optical
drive signal cable
Advertisement
Table of Contents
