1. Read the safety information that begins on page vii and "Installation guidelines"
on page 32.
2. Turn off the server and peripheral devices and disconnect all external cables
and power cords.
3. Unlock the left-side cover.
4. Remove the left-side cover (see "Removing the left-side cover" on page 36).
5. Open the bezel. Place your finger on the pull point area on the left side of the
bezel door and rotate it away from the server.
6. Remove the filler panel from the drive bay in which you want to install the
drive.
7. Grasp the tab on the drive bay EMC shield and rotate it to the open position.
Chapter 2. Installing optional devices
67