Maytag MGR5775QDW - 30 Inch Gas Range Use And Care Manual page 7

Operating During a
Power Failure
When Righting the surface burners, be sure all of the
controls are in the OFF position. Strike the match first and
hold it in position bdore turning the knob to MTE
1. Hold a lighted match to the desired surface burner head.
2. Push in and turn the control knob slowly to MTE
3. Adjust the flame to the desired level
Cooktop
To prevent the cooktop from discoloring or
staining:
Clean cooktop after each use.
Wipe acidic or sugary spills as soon as the cooktop has
_:s porcelain.
_ Unlike a range with standard gas burners,
this cooktop does not lift-up nor is it
removable. De net attempt to lift the
eoektep for any reason.
Seamed Burners
The sealed burners of your range are secured to the cooktop
and are not designed to be removed. Since the burners are
sealed into the cooktop, boilovers or spills will not seep
underneath the cooktop.
However, the burner should be cleaned after each use. The
head portion of the burner is easily removed for cleaning.
{See page 20 for cleaning directions.}
The burner heads must be correctly placed on the burner
base for proper operation of the burner.
High Performance Burners
There is one high speed burner located in the right front position
on your range. Select models also have a second high speed
burner located in the left front position. These burners offer
higher speed cooking that can be used to quickly bring water to
a boil and for large-quantity cooking.
Simmer Burner
This burner is located in the center position. The simmer
burner offers a lower BTU* flame for delicate sauces or
melting chocolate.
BTU ratings will vary when using LP gas,
6