Repeating Defects Appear On Prints - Lexmark C792 Manual

Repeating defects appear on prints

Try one or more of the following:
R
EPLACE THE PRINT CARTRIDGE
Replace the print cartridge of the color with the repeating defect, if the print defects occur in the following instances:
•
in every 37.7 mm (1.48 in.) of the page
•
in every 41.6 mm (1.64 in.) of the page
•
in every 42.7 mm (1.68 in.) of the page
•
in every 94.3 mm (3.71 in.) of the page
R
EPLACE THE FUSER
Replace the fuser if print defects occur in the following instances:
•
in every 95.0 mm (3.74 in.) of the page
•
in every 146.7 mm (5.78 in.) of the page
Light colored line, white line, or incorrectly colored line appears on prints
ABCDE
ABCDE
Try one or more of the following:
M
AKE SURE THERE IS NO DEFECTIVE PRINT CARTRIDGE
Replace the defective print cartridge.
M
AKE SURE THE TRANSFER BELT IS NOT DEFECTIVE
Replace the defective transfer belt. For more information, see the instruction sheet that came with the replacement part.
ABCDE
ABCDE
ABCDE
Print quality guide
Page 2 of 10