Ricoh Aficio SP 8300DN User Manual page 111

Problem
Some characters are not
printed or appear strange.
Print speed or application
relinquishing speed is slow.
Print ends mid-job.
A print instruction was issued
from the computer, but
printing did not start.
Causes
The printer driver settings are
not configured correctly.
The printer driver settings are
not configured correctly.
An error might have
occurred.
User Authentication may
have been set.
Other Printing Problems
Solutions
PCL 5e
On the printer driver's [Print
Quality] tab, select [600 dpi] in
the "Resolution" area.
PCL 6
• On the printer driver's
[Detailed Settings] tab, click
[Print Quality] in "Menu:",
and then select [Quality] in
the "Print Priority:" list.
• On the printer driver's
[Detailed Settings] tab, click
[Print Quality] in "Menu:",
and then select [Raster] in
the "Vector/Raster:" list.
PostScript 3
On the printer driver's [Detailed
Settings] tab, click [Print Quality]
in "Menu:", and then select [Text]
in the "Dithering:" list.
For details about the printer driver
settings, see the printer driver Help.
Only when using PCL 6
On the printer driver's [Detailed
Settings] tab, click [Print Quality]
in "Menu:", and then select
[Speed] in the "Print Priority:" list.
For details about the printer driver
settings, see the printer driver Help.
Quit any other applications.
Check the printer's display panel to see
if an error has occurred.
For details about User Authentication,
see Security Guide.
109