Installing Hyper-V (For Windows 2008 64-Bit Only); Enabling Bitlocker Drive Encryption - HP ML310 - ProLiant - G2 User Manual

when viewing the Web Agent Help from the System Management Homepage, text that appears in the left
column of the Help screen is not displayed properly if Java™ Virtual Machine is not installed.

Installing Hyper-V (For Windows 2008 64-bit only)

Click Start, and select Administrative Tools>Server Manager.
1.
In the left column, click Roles.
2.
Select Add Roles and click Next to proceed.
3.
Select the checkbox for Hyper-V component and click Next to continue.
4.
Click Next.
5.
Follow the instructions and select the appropriate settings, click Install to start installation.
6.
Click Close and then press Yes to restart the system to complete the installation.
7.

Enabling BitLocker drive encryption

If you selected NO for BitLocker support, during the initial operating system installation, set existing 1.5
GB system partition as Active using Disk Manager and reboot the system so your server boots from 1.5
GB partition. Complete the following steps starting with 1.
If you selected Yes, during the initial operating system installation, complete the following steps:
Add BitLocker feature from server manager and reboot the server.
1.
After the operating system boots, log in as administrator, go to Control Panel, click Security, and
2.
then click BitLocker Drive Encryption.
If the User Account Control dialog box appears, confirm the action and then click Continue. The
3.
BitLocker Drive Encryption page appears.
Click Turn On BitLocker on the operating system volume. The following warning appears:
4.
BitLocker encryption might have a performance impact on your server. If your
TPM (Trusted Platform Module) is not initialized, the TPM Security Hardware wizard appears. Follow
the directions to initialize the TPM. You must restart or shut down your computer for the changes to
take place.
On the Save the recovery password page, the following options appear:
5.
Save the password on a USB drive. This saves the password to a USB flash drive.
o
Save the password in a folder. This saves the password to a folder on a network drive or other
o
location.
Print the password. This prints the password.
o
Use one or more of these options to preserve the recovery password. For each option, select the
option and follow the wizard steps to set the location for saving or printing the recovery password.
When you have finished saving the recovery password, click Next. The Encrypt the selected disk
6.
volume page appears.
Post-installation tasks 17