Browse Address Table - D-Link DES-3624i User Manual

Stackable NWay Ethernet Switch User's Guide
TX (GOOD) The number of good frames sent from the respective port.
Total RX The number of frames received, good and bad.
TX Octets The number of good bytes sent from the respective port.
RX Octets The number of good bytes received. This also includes local and dropped packets.
Total RX The number of bytes received, good and bad.
Unicast RX/Unicast TX The number of good unicast frames received and sent. This includes dropped unicast
packets.
Multicast RX/Multicast TX The number of good multicast frames received and sent. This includes local and
dropped multicast packets.
Broadcast RX/Broadcast TX The number of good broadcast frames received and sent. This includes dropped
broadcast packets.

Browse Address Table

The Browse Address Table screen allows the user to view which Switch port(s) a specific network device uses to
communicate on the network. You can sort this table by MAC address, port, VLAN ID, and sequence. This is useful for
viewing which ports one device is using, or which devices are using one port.
To display the Browse Address Table screen, choose Network Monitoring from the main menu and then choose
Browse Address Table. The following screen appears:
To browse by MAC address, select MAC in the Search By field, fill in the MAC address field, and then press FIND.
To browse by port number, select Port in the Search By field, choose the desired Switch and Module in the respective
fields, enter the number of the Port you want to configure, and then press FIND.
Using the Console Interface
Figure 6-58. Browse Address Table
95