D-Link DES-3624i User Manual page 169

Stackable NWay Ethernet Switch User's Guide
If both the Firmware Update and Use Config File options are enabled, the Firmware Update command will take
precedence and only the firmware file will be uploaded to the switch.
The Config image file, which contains all configuration settings and was created by the switch is prefixed with the version
number of the runtime software to help with file management.
# Sample Config File
Code_type=PROM
Image_file="e:\3624\3624prom.tfp"
# specify IP address
Ip_addr = 10.12.19.102
# specify subnet mask
Subnet_mask = 255.128.0.0
# specify default gateway
Default_gateway = 10.254.254.253
Sample Configuration File 169