Stackable NWay Ethernet Switch User's Guide
Trunk Groups
The Switch supports up to three trunk groups. Trunks are groups of ports that are banded together to form a single, logical,
high-bandwidth data pipe.
Items in the above window are defined as follows:
Anchor The Anchor port for the trunk group. All configuration settings changes made to the anchor port will
automatically be made to the other ports in the trunk.
Name The user-assigned name of the trunk group.
Members The continuous number of ports that will be members of the trunk group.
State Allows the trunk group to be Enabled or Disabled.
Click Apply after each set of trunk group changes is made.
Web-Based Network Management
Figure 7-6. Trunk Groups window
109