The Kzpba-Cb Scsi Id - Compaq TruCluster Server AA-RHGWC-TE Manual

Example 4–4: Displaying Devices on an AlphaServer 8200 (cont.)
dkf4.0.0.1.1
dkf5.0.0.1.1
dkf6.0.0.1.1
dkf100.1.0.1.1
dkf200.2.0.1.1
dkf300.3.0.1.1
polling for units on kzpsa0, slot 2, bus 0, hose1...
kzpsa0.4.0.2.1
dkg0.0.0.2.1
dkg1.0.0.2.1
dkg2.0.0.2.1
dkg100.1.0.2.1
dkg200.2.0.2.1
dkg300.3.0.2.1
polling for units on kzpsa1, slot 3, bus 0, hose1...
kzpsa1.4.0.3.1
dkh100.1.0.3.1
dkh200.2.0.3.1
dkh300.3.0.3.1
polling for units on kzpsa2, slot 4, bus 0, hose1...
kzpsa2.4.0.4.1
dki100.1.0.3.1
dki200.2.0.3.1
dki300.3.0.3.1
4.3.3 Displaying Console Environment Variables and Setting the
KZPBA-CB SCSI ID
The following sections show how to use the show console command to display
the pk* and isp* console environment variables, and set the KZPBA-CB
SCSI ID on various AlphaServer systems. Use these examples as guides
for your system.
Note that the console environment variables used for the SCSI options vary
from system to system. Also, a class of environment variables (for example,
pk* or isp*) may show both internal and external options.
Compare the following examples with the devices shown in the show
config and show dev examples to determine which devices are KZPSA-BBs
or KZPBA-CBs on the shared SCSI bus.
4–14 TruCluster Server System Configuration Using UltraSCSI Hardware
DKF4 HSZ70
DKF5 HSZ70
DKF6 HSZ70
DKF100 RZ28M
DKF200 RZ28M
DKF300 RZ28
dkg TPwr 1 Fast 1 Bus ID 7
DKG0 HSZ50-AX X29Z
DKG1 HSZ50-AX X29Z
DKG2 HSZ50-AX X29Z
DKG100 RZ26N
DKG200 RZ28
DKG300 RZ26N
dkh TPwr 1 Fast 1 Bus ID 7
DKH100 RZ28
DKH200 RZ26
DKH300 RZ26L
dki TPwr 1 Fast 1 Bus ID 7
DKI100 RZ26
DKI200 RZ28
DKI300 RZ26
V70Z
V70Z
V70Z
0568
0568
442D
L01 A11
0568
392A
0568
L01 A11
442D
392A
442D
L01 A10
392A
442C
392A