Warranty Information; Regulatory Information - Oki MC160MFP Safety And Warranty Manual

Safety information
Hide thumbs Also See for MC160MFP:
Table of Contents

Advertisement

Available languages

Available languages

Regulatory Information

ENERGY STAR ®
Oki Data has determined that this
MFP model meets the ENERGY STAR
guidelines for energy efficiency. Look for
the ENERGY STAR logo on your printer .
Year 2000 Compliance
This product is Year 2000 Compliant . It contains
information technology that accurately processes date and
time data between the years 1999 and 2000, and carries
no issue for the September 9, 1999 (9999) programming
concern . This product, when used in combination with
products purchased from other manufacturers, whose
products properly exchange data and time information, will
accurately process the date and time .
Federal Communications Commission (FCC)
Declaration of Conformity
1 .
Product Identification
Product Name: MC160n MFP
Model No .: N35002A
2 .
Statement
This device complies with Part 15 of the FCC Rules .
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation .
3 .
Responsible Party
Oki Data Americas, Inc .
2000 Bishops Gate Boulevard
Mt . Laurel, NJ 08054-4620
1-800-654-3282 (1-800-OKI-DATA)
FCC Administrative Council for Terminal Attachment
Requirements for End Users
This device has been granted a registration number by the
Administrative Council for Terminal Attachment (ACTA),
under Part 68 and ACTA rules and regulations for direct
connection to the telephone lines . In order to comply
with these FCC rules, the following instructions must be
carefully read and applicable portions followed completely .
1 .
This equipment complies with Part 68 of FCC rules and
the requirements adopted by the ACTA . On the back
of the equipment is a label that contains, among other
information, a product identifier in the format US:
AAAEQ##TXXXX . If requested, this information may
need to be supplied for the telephone .
2 .
The following USOC jacks may be used with this equip-
ment: RJ11C .
3 .
A plug and jack used to connect this equipment to the
premises wiring and telephone network must comply
with the applicable FCC Part 68 rules and requirements
adopted by the ACTA . A compliant telephone cord and
modular plug is provided with this product . It is de-
signed to be connected to a compatible modular jack
that is also compliant . See installation instructions for
details .
4 .
The REN is used to determine the quantity of devices
which may be connected to the telephone line . Ex-
cessive RENs on the telephone line may result in the
devices not ringing in response to an incoming call . In
most, but not all areas, the sum of the RENs should not
exceed five (5.0). To be certain of the number of de-
vices that may be connected to the line, as determined
by the total RENs, contact the local telephone company .
For products approved after July 23, 2001, the REN for
this product is part of the product identifier that has the
format US:AAAEQ##TXXXX . The digits represented by
## are the REN without a decimal point (e .g ., 03 is a
REN of 0 .3) . For earlier products, the REN is separately
shown on the label .
5 .
If the equipment, MC160n MFP, causes harm to the
telephone network, the telephone company will notify
you in advance that temporary discontinuance of service
may be required . But if advance notice isn't practical,
the telephone company will notify the customer as soon
as possible. Also, you will be advised of your right to file
a complaint with the FCC if you believe it is necessary .
6 .
The telephone company may make changes in its facili-
ties, equipment, operations, or procedures that could
affect the operation of the equipment . If this happens,
the telephone company will provide advance notice in
order for you to make the necessary modifications to
maintain uninterrupted service .
If trouble is experienced with this equipment (MC160n
MFP), please contact the following for repair and/or

warranty information:

Oki Data Americas, Inc .
2000 Bishops Gate Blvd .
Mount Laurel, N .J . 08054-4620
Telephone:(856) 235-2600 or
(800)-OKIDATA (800-654-3282)
If the equipment is causing harm to the telephone
network, the telephone company may request that you
disconnect the equipment until the problem is resolved .
1 .
This equipment contains no user serviceable parts .
Please contact Oki Data for service .
2 .
This equipment cannot be used on public coin service
provided by the telephone company . Connection to Par-
ty Line Service is subject to state tariffs . Contact your
state Public Utility Commission, Public Service Commis-
sion, or Corporate Commission for information .
3 .
If your home has specially wired alarm equipment con-
nected to the telephone line, ensure the installation of
this MC160n MFP does not disable your alarm equip-
ment . If you have questions about what will disable
alarm equipment, consult your telephone company or a
qualified installer.
FCC Telephone Consumer Protection Act
The Telephone Consumer Protection Act of 1991 makes
it unlawful for any person to use a computer or other
electronic device, including FAX machines, to send any
message unless such message clearly contains in a margin
at the top or bottom of each transmitted page or on the
5 - English

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mc160n mfp

Table of Contents