Pk-519 Punch Kit (For Fs-533); Pk-520 Punch Kit (For Fs-534); Sd-511 Saddle Stitcher (For Fs-534) - Konica Minolta bizhub C224 Installation Manual

Konica Minolta bizhub C364/C284/C224
Specification & Installation Guide
Component Considerations

PK-519 Punch Kit (For FS-533)

PK-520 Punch Kit (For FS-534)

SD-511 Saddle Stitcher (For FS-534)

AU-202H AU-204H
AU-202H
AU-211P
Applicable Finisher FS-533
AU-211P
Number of holes 2 or 3 holes
Support Paper Weight Thin Paper (14 lb. to 15.5 lb.), Plain Paper (16 lb. to 24 lb.),
Thick paper (24.25 lb. bond to 79.75 lb. bond)
Support Paper Size 2-hole Punch Setting: 11" x 17", 8.5" x 14", 8.5" x 11"
3-hole Punch Setting: 11" x 17", 8.5" x 11"
Power Requirements Supplied from Finisher FS-533
Dimensions (WxDXH) 4.33" x 19.03" x 8"
AU-202H AU-204H
Weight Approx. Approx. 7 lb.
AU-211P
Applicable FS-534
Number of holes 2 or 3 holes
Support Paper Weight Thin Paper (14 lb. to 15.5 lb.), Plain Paper (16 lb. bond to 24 lb. bond),
Recycled Paper (16 lb. to 24 lb.),
Support Paper Size 2-hole Punch Setting: 11" x 17", 8.5" x 14", 8.5" x 11"
3-hole Punch Setting: 11" x 17", 8.5" x 11"
Power Requirements Supplied from Finisher FS-534
Dimensions (W x D x H) 2.375"x 19.375" x 5.563"
Weight Approx. Approx. 3.938 lb.
Applicable FS-534
Number of bins 1 Tray
Paper types Thin Paper (14 lb. to 15.5 lb.), Plain Paper (16 to 24 lb),
Thick Paper 1/1+/2 (24.25 to 55.5 lb.)*
*Can only be used as a cover page.
Paper sizes 12.25" x 18"L, 11" x 17", 8.5" x 14" L, 8.5" x 11",
Number of Center Stapled Plain Paper (16 to 24 lb.)
or Half-Folded Sheets 1–3 Sheets:
4–10 Sheets:
11–20 Sheets:
Number of 1 Sheet:
Tri-Folded Sheets 2–3 Sheets:
Staple mode Booklet, 2-point staple
Maximum staple sheet 20 sheets: (19 sheets/14 to 24 lb.) + (1 sheet/13 to 55.5 lb.)
Dimensions (W x D x H) 8.25" x 21.88" x 21.56"
Weight 52.94 lb.
Consumables SK-602 (5,000 x 3 pkg/case)
Power requirements Supplied from finisher
AU-204H
20 Sets
10 Sets
5 Sets
30 Sets
10 Sets
9