To install from the server using Windows XP
1. At the computer, click Start, and then click My Computer.
2. Do one of the following:
•
Click My Network Places.
•
Under Other Places, click My Network Places.
3. In the Add Network Place Wizard, use the following (UNC) network address:
\\<name of the server>\software
For example, \\HPSERVERLX\software
When the wizard completes, you should see software on <name of server> in
the My Network Places window.
4. Double-click the network place, and then open the Home Server Connector
Software folder.
5. Double-click Install.exe and follow the instructions on the installation wizards.
To install from the server using Windows Vista
Follow these steps for installing the server on 32-bit or 64-bit operating systems.
Note
To find out which version of Windows Home Server you have installed, double-
click the Windows Home Server icon
then click Resources in the left menu of the Windows Home Server Settings
dialog box. The version should say Windows Home Server with Power Pack 1.
1. At the computer, click Start, and then click Network.
2. Under Network Tasks, click Add a network place.
in the system tray. Click Settings, and
Getting Started
27