HP LX195 - MediaSmart Server - 1 GB RAM User Manual page 148

HP MediaSmart Server User's Guide
5. Uninstall HP MediaSmart Server and Windows Home Server Connector:
•
Click Start, Control Panel and select Add or Remove Programs.
•
Select HP MediaSmart Server and click Remove.
•
Select Windows Home Server Connector and click Remove.
6. Attach a network cable directly between your PC and the server.
•
Unplug one end of the the HP MediaSmart Server Ethernet cable from
your router or switch.
•
Plug the free end of the Ethernet cable into your computer so there is a
direct connection between the server and the computer.
7. Prepare the server for recovery or reset:
•
On the back of the server, hold down the Power button for at least 4
seconds to force the server to shut down.
•
On the back of the server, press the Power button to restart.
•
When the Health indicator is blinking violet and red, press and release the
recessed mode button on the front of the server using a paper clip. The
Health light should start blinking violet. Recovery mode is initiated.
142