HP LX195 - MediaSmart Server - 1 GB RAM User Manual page 141

Configure your firewall to allow any HP MediaSmart or Windows Home Server
applications.
Check that the Router is Correctly Configured for DHCP
The HP MediaSmart Server comes automatically set to use a
dynamically assign IP addresses. Most
Check that the router has the DHCP server correctly enabled. Refer to the documentation
that came with the router for instructions on proper DHCP server configuration.
For information about configuring a router for remote access, see Configuring your
broadband router in the Windows Home Server Console Help.
Windows Vista: Check that Network Discovery is turned on
To ensure that Network Discovery is turned on
1. Click the Start menu, and then select Control Panel.
2. In the Control Panel, click View network status and tasks.
3. In the Network and Sharing Center, make sure that Network discovery is on.
4. If Network discovery is off, click the down arrow
network discovery and Apply.
Check the Network is Set Up Properly for TCP/IP
Check the network is set up properly for
network has TCP/IP listed and selected for the network properties with these options
selected:
•
Obtain IP address
•
Obtain DNS server address automatically
Windows XP: To ensure your network is set up properly for TCP/IP
1. Click Start, and then select Control Panel.
2. Double-click Network and Internet Connections.
3. Double-click Network Connections.
4. If the computer is connected via Ethernet cable to the network, right-click Local
Area Connection (LAN).
5. If the computer is using a wireless connection, right-click Wireless Network
Connection.
6. Click Properties. In the dialog box that opens, check to ensure that TCP/IP is
listed and selected.
•
If TCP/IP is not listed, click Install, Protocol, and then Add. In the dialog
box that appears, select Internet Protocol (TCP/IP).
•
If TCP/IP is listed and checked, highlight it and click Properties, then
select Obtain IP address automatically and Obtain DNS server
address automatically.
7. All computers should be set identically.
router come with a built-in DHCP server.
TCP/IP
automatically
Troubleshooting & FAQs
DHCP server to
, then select Turn on
Check that each computer on the
135