HP LX195 - MediaSmart Server - 1 GB RAM User Manual page 137

The Firewall is Blocking the Connection
If using a firewall program, configure it to allow any HP MediaSmart or Windows Home
Server applications.
For instructions to unblock, see the software vendor's documentation.
For information about firewall blocking alerts, see
mean?.
Windows Vista: Check that Network Discovery is turned on
To ensure that Network Discovery is turned on
1. Click the Start menu, and then select Control Panel.
2. In the Control Panel, click View network status and tasks.
3. In the Network and Sharing Center, make sure that Network discovery is on.
4. If Network discovery is off, click the down arrow
network discovery and Apply.
Windows XP: To ensure your network is set up properly for TCP/IP
1. Click Start, and then select Control Panel.
2. Double-click Network and Internet Connections.
3. Double-click Network Connections.
4. If the computer is connected via Ethernet cable to the network, right-click Local
Area Connection (LAN).
5. If the computer is using a wireless connection, right-click Wireless Network
Connection.
6. Click Properties. In the dialog box that opens, check to ensure that
listed and selected.
•
If TCP/IP is not listed, click Install, Protocol, and then Add. In the dialog
box that appears, select Internet Protocol (TCP/IP).
Troubleshooting & FAQs
What do firewall blocking messages
, then select Turn on
TCP/IP is
131