Bios Setup Utility - Packard Bell ENTJ75 Service Manual

BIOS setup utility

28
CHAPTER 2: System utilities
The BIOS setup utility is a hardware configuration program built into the notebook's
BIOS (Basic Input/Output System). The notebook was shipped already properly
configured and optimized. However, if the user encounters configuration problems,
you may need to run Setup.
To run the BIOS Setup Utility:
1
Turn on the notebook.
If the computer is already turned on, save your data and close all open
applications, then restart the computer.
2
Press F2 when the Press <F2> to enter Setup prompt appears on the bottom
of the screen.
Use the left and right arrow keys to move between selections on the menu
bar.