Problem solving
7-10
•
Load Xerox 4024 Dual Purpose, 24-pound paper (or a high
quality equivalent).
•
Verify that the bank regularly adjusts and cleans the reader
sorter to the specifications set by the manufacturer.
•
Make sure that the reject rate is based on a statistically valid
number of documents and reader sorters. The 0.5 per cent is
the average of a large number of documents. A reject rate for
a small batch (for example, 500) may vary greatly. Use the
following guidelines:
– Use a batch of 3000 to 10,000 documents.
– Sort continuously, not in bunches.
– Use several sorters of the same model, not a single unit.
NOTE: The 0.5 percent expectation applies to the first
pass through a typical high speed reader sorter working
with fresh and unsorted documents.
•
Use normal document sizes.
•
Ensure that the paper grain of the finished documents is
compatible with the reader sorter mechanical requirements
(normally long grain).
•
Avoid jams by making sure that the reader sorter is in good
working order and operates in optimal environmental
conditions.
Generic MICR Fundamentals Guide