Printing On Special Materials - Dell 1110 - Laser Printer B/W User Manual

4. If you are printing multiple pages, load the next sheet after the first page prints out, and press
.
Repeat this step for every page to be printed.

Printing on Special Materials

1. Open the paper input tray.
2. Load the print material in the paper input tray. Do not mix types.
3. Adjust the length and width guides against the print material without bending it.
4. To print on special material, you must select Manual Feed for Source from the software
application, and then select the appropriate paper size and type. For details, see
5. Press to start.
See the following directions to load each type of print material.

Load an envelope in the tray with the flap side down and the stamp area on the top left
side. The end of the envelope with the stamp area enters the printer first, from the
center of the tray.
NOTICE: Never load envelopes with stamps, clasps, snaps, windows, coated linings, or self-
stick adhesives. These envelopes may severely damage the printer. The stamp is shown in
the illustration only for placement.
CAUTION: If you print 20 envelopes in succession, the surface of the top cover may
become hot. Please exercise caution.
"Paper Tab".