Connecting A Printer Cable - Dell 1110 - Laser Printer B/W User Manual

Make sure that all four corners are flat in the tray.
4. Be careful not to overload the paper tray. Overloading may cause paper jams.
5. Squeeze the length guide and slide it until it lightly touches the end of the paper stack.
Squeeze the width guide and move it toward the stack of paper until it lightly touches the side
of the stack.
NOTE: Improper adjustment of paper guides can result in paper jams.

Connecting a Printer Cable

To print from your computer, you need to connect your printer to your computer with a Universal
Serial Bus (USB) cable. USB cables are sold separately. Contact Dell to purchase a USB cable.
NOTE: Connecting the printer to the USB port of the computer requires a certified USB cable.
You will need to buy a USB 1.1 compliant cable that is 3 m or less in length.
To connect the printer to a computer:
1. Make sure the printer, computer, and any other attached devices are powered off and
unplugged.
2. Connect a USB cable to the USB cable connector on your printer