Dell 1110 - Laser Printer B/W User Manual page 24


Load a sheet of labels in the tray with the side to be printed on facing up.
NOTE: To prevent labels from sticking to each other, do not let the printed label sheets stack
up as they are printed out.

Load a transparency in the tray with the side to be printed on facing up, and the top with
the adhesive strip inserted first.
NOTE: To prevent transparencies from sticking to each other, do not let the printed sheets
stack up as they are printed out.
NOTE: Place transparencies on a flat surface after removing them from the printer.
NOTE: Do not use transparencies that are separating from the backing sheet.