Dell 6224 - PowerConnect Switch - Stackable Getting Started Manual page 40

4
Finally, set up the gateway. Please enter the IP address of the
gateway from which this network is reachable (e.g. 192.168.1.1):
[ 192.168.1.1]
This is the configuration information that has been collected:
SNMP Interface = "Dell_Network_Manager"@192.168.1.10
SNMP
User Account set up = admin
Password = **********
Management IP address = 192.168.1.100:255.255.255.0
IP
Gateway = 192.168.1.1
5
If the information is correct, please select (Y) to save the
configuration, and copy to the start-up configuration file. If the
information is incorrect, select (N) to discard configuration and
restart the wizard:
y
Thank you for using the Dell Easy Setup Wizard. You will now enter
CLI mode.
38
192.168.1.1<Enter>
= "Dell_Network_Manager"@192.168.1.10
= 192.168.1.100:255.255.255.0
(N)
<Enter>
Dell
IP
= admin
= **********
= 192.168.1.1
(Y)
[Y/N]
CLI