Dell 6224 - PowerConnect Switch - Stackable Getting Started Manual page 269

Next, an IP address is set up. The IP address is defined on the
default VLAN (VLAN #1), of which all ports are members. This is the
IP address you use to access the CLI, Web interface, or SNMP
Please enter the IP address of the device (A.B.C.D):
Finally, set up the gateway. Please enter the IP address of the
gateway from which this network is reachable (e.g. 192.168.1.1):
This is the configuration information that has been collected:
SNMP Interface = "Dell_Network_Manager"@192.168.1.10
If the information is correct, please select (Y) to save the
configuration, and copy to the start-up configuration file. If the
information is incorrect, select (N) to discard configuration and
Thank you for using the Dell Easy Setup Wizard. You will now enter
Please enter the IP subnet mask (A.B.C.D or /nn):
Management IP address = 192.168.1.100:255.255.255.0
interface for the switch.
To set up an IP address:
192.168.1.100<Enter>
255.255.255.0<Enter>
User Account set up = admin
Password = **********
Gateway = 192.168.1.1
restart the wizard: [Y/N] y<Enter>
‫מדריך תחילת העבודה‬
3 : ‫שלב‬
4 : ‫שלב‬
192.168.1.1<Enter>
5 : ‫שלב‬
CLI mode.
| 274