When An Error Message Is Displayed During Measurement; When A Warning Message Is Displayed After Measurement - Yamaha RXV465 - RX AV Receiver Owner's Manual

Optimizing the speaker setting for your listening room (YPAO)
When an error message is displayed
during measurement
Select "Retry" or "Exit" using nCursor l / h
and then press nENTER.
Retry
Performs "Auto Setup" again.
Exit
Terminates the measurement and "Auto Setup."
y
• See page 51 for details on error messages.
• When "E-5:NOISY" appears, you can continue measurement. To
continue measurement, select "Proceed." However, we recommend that
you solve the problem first and then perform measurement again.
20
En
When a warning message is displayed
after measurement
If a problem occurs during measurement, "W-xx" (xx
indicates the number) is displayed on the front panel
display. Check the error and solve the problems.
W-1:PHASE
y
• See page 52 for details on warning messages.
• Optimization will not be performed while a warning message is
displayed. We recommend that you solve the problem and perform "Auto
Setup" again.
1
If a warning message is displayed, press
nENTER.
Details of the warning message are displayed. If there
are multiple warning messages, you can display the
next message using nCursor h.
2
To return to the top result display, press
nENTER again.