Table of Contents
Advertisement
FIGURE 68. CONTROL EXPANDED ALERT DETAIL
FIGURE 70. PROGRAMMABLE ANNUNCIATION
OPERATION BUTTON
The operation button displays the Burner Control running
operation, including setpoint and firing rate values. From this page
the user can change setpoints, manually control the boiler's firing
rate, manually turn pumps on, view annunciation information,
and switch between hydronic heating loops (Central Heat and
Domestic Hot Water), as shown in Figure 69. If a password is
required to change any of the settings on this page, the user can
press the Login button to enter the password.
Annunciation information is shown in Figure 70 and Figure 71.
FIGURE 71. FIXED ANNUNCIATION
FIGURE 69. HYDRONIC OPERATION PAGE
58
Advertisement
Table of Contents
