Installation; Installation Accessories - Miele DA 220-4 Operating And Installation Instructions

^ Please read the "Important Safety
Instructions" and Installation
instructions before installing this
hood.
Protective film
The casing is covered with a protective
film to prevent scratching during
transport.
^ Peel off the film before installing the
casing parts.
,
CAUTION
To avoid risk of hand or other injury,
avoid contact with sharp edges
during the assembly and installation
process.

Installation accessories

4 Screws 8 x 60 mm with
4 Washers
(S10 wall anchors included in the
packaging are not for use in USA/CDN.)
2 spring clips to hang the hood onto
the mounting plate
4 Flat head screws M 6 x 20 mm with
nose and
4 M 6 locking nuts for securing the
motor assembly
1 hose clip for securing the ducting

Installation

27