Black 3-Pin Door Lock Harness - Marksman Extreme X3 Installation And Owner's Manual

Wiring
(continued)
HC3: Black 3-Pin Door Lock Harness
Blue Wire: (-) Door Unlock Control
Connect the Blue wire to the unlock wire from the door lock switch. If the door locking system is not a (-)
trigger system, additional relays will be required.
Green Wire: (-) Door Lock Control
Connect the Green wire to the lock wire from the door lock switch. f the door locking system is not a (-) trigger
system, additional relays will be required.
3 Wire Ground Trigger Door Lock System
Green Wire: Connect to Lock
Blue Wire: Connect to Unlock
Black 3-Pin
Mini Connector
To Door Lock
Control Relays
P1: LED Status Indicator
P2: Valet Switch
Optional Wiring Diagrams
Red/White Wire: (When programmed for (-) 2nd Unlock Output)
When Programmed for this function, the Red/White wire provides a second (-) unlock output to unlock the
passenger's doors. Use the "Blue Wire" on the Black 3 pin connector to unlock the drivers door.
Unlock Driver's Door First for 3-Wire Negative Door Lock Systems
Green Wire
Blue Wire
Red/White Wire
Driver's Door
Switch
To +12V or Ground
Driver's Door
87
+12V
87A
ALA984H
85
86
Relay
30
Lock
Unlock
Lock
Door Lock Relay
Control Module
Cut
Unlock Wire
Lock Control
Switch
( - ) Lock Out
Ground Input
( - ) Unlock Out
Passenger's
Door Switch
Unlock
To +12V or Ground
Passenger's Door
5