Power Save Mode; Button Lock; Out Of Range Indication; Led Display - Marksman M8a User Manual

Automotive security and remote start system
Hide thumbs Also See for M8a:
Table of Contents

Advertisement

Note: The factory default setting at "Power Save Mode", before operation the 2-way LED remote
control transmitter, press the
for 3 seconds, with two beeping sound to indicate exit the "Power Save Mode" and all remote
transmitter is on function.

Power Save Mode

The power save mode allows you to temporarily bypass all remote transmitter functions. While in
power save mode, the LED remote transmitter uses no current in order to save the battery power,
and the "beep" sound will always be muted .
Entry: Press the
seconds, with long beeping sound to indicate entry into the "Power Save Mode" and all remote
transmitter functions will be temporarily bypassed.
Exit: Press the
seconds, with two beeping sound to indicate exit of the "Power Save Mode" and all remote
transmitter functions return.

Button Lock

Button lock is useful if you want to temporarily disable the transmission function of the remote
control to prevent any inadvertent pressing of buttons. Press the
seconds press and hold the
function. The "beep" sound is muted while buttons are pressed, and the LED will flash for a few
seconds to show the remote control transmitter is in "Button Lock" mode.

Out of Range Indication:

The system will automatically check the range every 20 minutes after being armed. If user is out
of range, the transmitter will emit five short "Beep" sounds.

LED Display

LED
Off
Slow Flash
Fast Flashing
On Solid
2 Flashes - Pause
3 Flashes - Pause
4 Flashes - Pause
5 Flashes - Pause
4
button first, within 3 seconds press and hold the
button first, within 3 seconds press and hold the
button first, within 3 seconds press and hold the
button for 2 seconds to activate or cancel the "Button Lock"
(Also See Installation Manual)
Function
System is Disarmed
System is Armed
System in Passive Arming
System in Valet Mode
Zone 1 - Warn Away Trigger
Zone 2 - Trigger on Trunk/Hook
Zone 3 - Trigger on Door Switch
Zone 4 - Trigger on Shock Sensor
Zone 5 - Trigger on Ignition Switch
button
button for 3
button for 3
button first, within 3

Advertisement

Table of Contents
loading

Table of Contents