Model C1060
Programming Station
Battery Charger
3M 2001
February
The programming station is used to program C960 and C1060 headsets to the
same channel as the base station. Infrared light is used to transfer program data
to the C1060 headset and a separate jack is provided for the C960 headset
programming cable. See Figure 3.
The battery charger charges headset batteries in approximately 1.5 to 2 hours.
The charger is available in 3–slot and 6–slot versions. See Figure 4.
Figure 4. 3–Slot and 6–Slot Battery Chargers
Figure 3. Programming Station
System Description
3