System Components; Base Station; Headset And Transceiver Pack; Battery Charger - 3M C1025 Operating Instructions Manual

Headset intercom system
Hide thumbs Also See for C1025:
Table of Contents

Advertisement

System Descriptions
System
Components

Base Station

Headset and Transceiver
Pack

Battery Charger

2
The number of system components and the procedures necessary to operate
them vary depending on the system configuration. However, three
components are common to all system configurations.
The base station is the interface between the customer and the transceiver
pack worn by the operator. See Figure 1.
Figure 1. Base Station
The transceiver pack is used by the operator to communicate with customers
and with other store personnel who are wearing transceiver packs.
The headset is connected by a communications cable to the battery-powered
transceiver pack. See Figure 2.
Figure 2. Headset and Transceiver Pack
The battery charger charges batteries in approximately 1.5 to 2 hours. The
charger is available in 3-slot and 6-slot versions. See Figure 3.
Figure 3. 3-Slot and 6-Slot Battery Chargers
Model C1025
© 3M 2006

Advertisement

Table of Contents
loading

Table of Contents