Headset Preparation; Adjusting Headband Size; Positioning The Ear Pad And Microphone - 3M C1060 Operating Instructions Manual

Headset Preparation

Adjusting Headband
Size
Positioning the Ear
Pad and Microphone
8
Adjust the size of the headband until the ear pad rests against one ear and the
battery-side pad rests just above the other ear.
Slide the headband out of the headset to make it larger.
Push the headband into the headset to make it smaller.
Rotate the microphone boom up or down so that its tip is in line with the corner
of your mouth. Do not bend the rubber microphone boom. See Figure 8.
Figure 7. Headband Size
Figure 8.
Model C1060
-
3M 2001 February