Using The Pouring Shield; Using Your Kitchenaid ® Beater Attachments - KitchenAid KSM7586PCA Use & Care Manual

Using Your Stand Mixer

Using the Pouring Shield*

Attaching the Pouring Shield
1. Make sure the speed control lever
is set to the off/o position.
2. Unplug the Stand Mixer.
3. Attach desired accessory and raise
the mixing bowl.
4. Slide pouring shield collar around
beater shaft, centering collar over
rim of bowl.
Using the Pouring Shield*
Pour ingredients into the mixing bowl
through the chute portion of shield.
IMPORTANT: Make sure the guides
on the bottom of the chute rest on
the rim of the bowl to keep ingredients
from falling outside the bowl as they
are added.
*Included with some models.
Using Your KitchenAid
flat Beater for normal to heavy mixtures:
cakes
creamed frostings
candies
cookies
pie
Wire Whip for mixtures that need air incorporated:
eggs
egg whites
heavy cream
boiled frostings
PowerKnead™ Spiral Dough hook for mixing and kneading yeast doughs:
breads
rolls
pizza dough
Removing the Pouring Shield
1. Make sure the speed control
lever is set to the off/o position.
2. Unplug the Stand Mixer.
3. Slide the pouring shield off the
bowl.
4. Lower the bowl support by
turning the bowl-lift lever down.
5. Remove accessory and the
mixing bowl.
Beater Attachments
®
biscuits
quick breads
meat loaf
mashed potatoes
pastry
sponge cakes
angel food cakes
mayonnaise
some candies
coffee cakes
buns
Pouring Chute
9