General Instructions - KitchenAid KSM7586PCA Use & Care Manual

Attachments and Accessories

General Instructions

To Attach
1. Turn Stand Mixer off and unplug.
2. Loosen attachment knob by turning
it counterclockwise.
3. flip up hinged hub cover.
4. Insert attachment shaft housing into
attachment hub, making certain that
attachment power shaft fits into square
attachment hub socket. It may be
necessary to rotate attachment back
and forth. When attachment is in
proper position, the pin on the
attachment will fit into the notch
on the hub rim.
5. Tighten attachment knob by turning
clockwise until attachment is
completely secured to Stand Mixer.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire, or electrical shock.
6. Plug into a grounded 3 prong outlet.
To Remove
1. Turn Stand Mixer off and unplug.
2. Loosen attachment knob by turning it
counterclockwise. Rotate attachment
slightly back and forth while pulling out.
3. Replace attachment hub cover.
Tighten attachment knob by turning
it clockwise.
17