Table of Contents
Advertisement
USB and SD/MS/MMC Card Function
USB and SD/MS/MMC Card Function
Preparation:
1. Press POWER to turn on the unit.
2. Press the Input button and select DVD, press the Enter button to shift to DVD mode.
3. Insert the USB memory stick into the unit's USB slot, or insert the SD/MS/MMC card into the
SD/MS/MMC card slot on the right side of the unit. Please see the below figure:
Make sure that files are stored on the USB and the SD/MS/MMC card before the installation.
4. Press the Card button to cycle among disc playback, USB playback or SD/MMC, MS playback.
The default state is disk playback. Please see the below figure:
5. Press the ◄ or ►button to select the folder, and press Enter button to enter.
6. Press the ◄ or ► buttons to select the desired track. Then press Play
playback.
7. Press the Stop
from the beginning of the current track. Press the
Note:
1. The screen display will vary from disc to disc.
2. Pull out the USB or SD/MS/MMC card directly after the files are played. Then the unit will be in
the state of disc playback again.
00:00
00:00
001/002
BAK
JPEG
button to stop playback: if the Stop
button is pressed, the playback will start
button to return to the folder menu.
- 34 -
button to start
Advertisement
Table of Contents
