Dell XPS 630i Service Manual page 58

1
2
1 drive-release latch
7 Connect the power and data cables to the back of the floppy drive.
8 Check all cable connections and fold cables out of the way to avoid
blocking airflow between the fan and cooling vents.
9 Replace the drive panel (see "Installing the Drive Panel" on page 54).
10 Replace the computer cover (see "Replacing the Computer Cover" on
page 119).
NOTICE:
To connect a network cable, first plug the cable into the network port or
device and then plug it in to the computer.
11 Connect your computer and devices to electrical outlets, and then turn
them on.
See the documentation that came with the drive for instructions on
installing any software required for drive operation.
12 Enter system setup (see "Entering System Setup" in your Owner's
Manual), and select the appropriate Diskette Drive option.
58
Drives
2 floppy drive