Table of Contents
Advertisement
Connecting external devices
If you install an optional adapter that the server supports, you can attach external
devices to the server.
To attach an external device, complete the following steps:
1. Read the safety information that begins on page v, "Installation guidelines" on
2. Turn off the server and all attached devices.
3. Follow the instructions that come with the device to prepare it for installation
Note: If you are attaching an external device, see the documentation that comes
with the device for information about cabling.
Installing the server in a rack
An optional Tower-to-Rack Kit is needed to convert the server from a tower model
to a rack model. You can then install the server in a rack cabinet. To order a
Tower-to-Rack Kit for the server, contact your IBM marketing representative or
authorized reseller.
48
xSeries 206m Types 8485 and 8490: User's Guide
page 19, and the documentation that comes with the device.
and to connect it to the server.
Advertisement
Table of Contents
