Mute; Temporary Ringer Silencing; Temporary Tone Dialing; Find Handset - VTech CS6319 User Manual

Telephone operation

Mute

The mute function allows you to hear the other party but the
other party cannot hear you.
During a call, press MUTe/
1.
handset screen shows MUTeD for a few seconds and
appears until the mute function is turned off.
MUTE
Press MUTe/
2.
The handset screen temporarily shows
MICrOPhONe ON.

Temporary ringer silencing

When the telephone is ringing, you can temporarily silence the ringer of the
handset without disconnecting the call. The next call rings normally at the
preset volume.
To silence the handset ringer:
• Press OFF/
CLeAr
and display.

Temporary tone dialing

If you have pulse (rotary) service only, you can switch from
pulse to tone dialing temporarily during a call. This is useful if you need to
send touch-tone signals to access your telephone banking or long distance
services.
1. During a call, press
2. Use the dialing keys to enter the relevant number. The telephone sends
touch-tone signals.
3. The telephone automatically returns to pulse dialing mode after you end
the call.

Find handset

Use this feature to page all system handsets.
Press /FIND hANDSeT on the telephone base. All idle
1.
handsets ring and the screens show ** PAGING **.
2. To end paging, press
9, #, ) on the handset, or press /FIND hANDSeT
TONe
on the telephone base.
Paging rings all the registered handsets even if the ringer
volume is set to off.
reMOVe
again to resume the conversation.
reMOVe
or MUTe/
reMOVe
.
TONe
/
FLASh
on the handset. The
, rINGer MUTeD
, , any dialing keys (0-
15
MUtED
3:15 MUTE 12/25
PM
RINGER MUtED