Symantec 10551441 - AntiVirus Corporate Edition Administrator's Manual page 115

3 In the Scheduled Scans dialog box, on the Server Group Scans tab, click New.
4 In the Scheduled Scan dialog box, under Name, type a name for the scan.
5
Ensure that Enable scan is checked.
6 Set a frequency for the scan.
7 Set a time for the scan.
You can type any time in increments of 1 minute or use the drop-down list to
select a time in 15-minute increments.
8 Click Advanced.
9 In the Advanced Schedule Options dialog box, check Handle Missed Events
Within, and then set the time limit within which you want the scan to run.
For example, you may want a weekly scan to run only if it is within three
days after the scheduled time for the missed event.
10 Click OK.
11 In the Scheduled Scan dialog box, click Scan Settings.
12 In the Select Items dialog box, click Options.
13 In the Scheduled Scans Options dialog box, you can:
Select file types or extensions to scan.
■
Assign primary and secondary actions for detected viruses, blended
■
threats, and some other threats. If deleting a threat in an expanded
threat category can cause a system failure, the only available action is
to log it.
Enable scanning for threats that are in memory. See
■
memory threats"
Scanning for viruses and other threats
on page 132.
Configuring scheduled scans
"Scanning for in-
115