Renaming client groups
Deleting client groups
The Symantec System Center does not support renaming client groups directly.
If you need to change the client group name, you must complete the following
tasks:
Create a new client group, importing settings from another client group if
■
desired.
See
"Creating new client groups"
Move clients from the old client group to the new client group using a drag-
■
and-drop operation.
Delete the old client group.
■
See
"Deleting client groups"
Before you delete a client group, you may want to reassign the clients to another
client group.
When a client group is deleted, the clients that are assigned to it retain the
settings of the deleted client group. The clients are not assigned new settings
until one of the following actions occurs:
The client checks in with its parent server. The client is then assigned the
■
server's default settings for unassigned clients.
The client is assigned to another client group. The client is then assigned
■
the settings of the new client group.
If you delete a client group, and then recreate it before the clients check in with
their parent servers or are reassigned, the clients resume membership in the
group automatically. They continue to assume the settings of that group.
To delete a client group
1
In the Symantec System Center console, in the left pane, unlock the server
group from which you want to delete the client group.
2
Double-click the server group.
3
Double-click the Groups folder.
4
Right-click the target group, and then click Delete Group.
5
Click Yes.
6
Click Delete.
Managing Symantec AntiVirus
on page 53.
on page 57.
Managing with client groups
57