3Com Router 3016 Installation Manual page 51

Creating a New Router
Password
4 To upload the application or configuration files, enter the appropriate path and file
name at the following prompts:
ftp>put
local file
remote file
After the uploading is completed, the ftp> DOS prompt displays again.
5 Enter dir to display the name and size of the file on the router. If the upload is
successful, the sizes of the file on the router and on the PC will be the same.
6 To download the application or configuration files, enter the appropriate path and
file name at the following prompts:
ftp>get
local file
remote file
After the upload or download is complete, exit the FTP client
program:
ftp>quit
If the router's Boot ROM password or user password is lost, use the following
procedure:
1 Boot the router.
2 Press Ctrl+B within 5 seconds of the prompt that tells you to do so.
3 Enter 3 when prompted for your choice:
Boot Menu:
1: Download application program with Xmodem
2: Download application program with TFTP
3: Clear application password
4: Clear configuration
5: Start up and ignore Console configuration
6: Exit and reboot
Enter your choice(1-6):3
4 When the Boot menu is shown again, enter 6 to exit the Boot menu and run the
router's main software.
5 Press Enter in the system view to enter the user password directly.
[3Com] local-user user password simple service-type
exec-administrator 123
In this example,
user
password.
[R3000] quit
[R3000] save
6 Execute the save command after modifying the user password to save the
change.
If the Boot ROM password for the router is lost, contact your Service
representative.
indicates the user name,
Software Maintenance
indicates the new user
123
51