Alpine INE-W927HD Quick Reference Manual page 213

When creating a new vehicle profile, first you need to select the vehicle type. Then you need to set the
following parameters. You can modify the same parameters when you edit an existing profile:
Button
Tap this button to rename the profile for something meaningful.
Enter the average consumption of your vehicle when used in built-up areas. The
unit for consumption can be set in Regional Settings.
Enter the average consumption of your vehicle when used on highways. The unit
for consumption can be set in Regional Settings.
Select the engine and fuel type of your vehicle. This helps in estimating the CO
emission.
Enter the average fuel price for travel cost calculation. The currency can be set in
Regional Settings.
Set the maximum speed you travel with the vehicle.
Vehicle types:
When creating a new vehicle profile, select one of the below vehicle types.
•
:
•
Maneuver restrictions and directional constraints are taken into account when planning a
route.
•
Roads are used only if access for cars is allowed.
•
Private roads and resident-only roads are used only they are inevitable to reach the
destination.
•
Walkways are excluded from routes.
•
:
•
All maneuvers are available in intersections.
•
Directional constraints are taken into account the way that opposite direction is allowed with
a low speed.
•
A private road is used only if the destination is there.
•
Walkways are excluded from routes.
•
:
Description
76
2