Alpine INE-W927HD Quick Reference Manual page 127

4
Mounting the Microphone.
For safe use, make sure of the following:
• location is stable and firm.
• driver's view and operations are not obstructed.
• microphone is located where the driver's voice can be easily
picked up (on the sun visor, etc.).
When you speak into the microphone, you should not have
to change your driving posture. This may cause a
distraction, taking your attention away from safely driving
your vehicle. Carefully consider direction and distance while
mounting the microphone. Confirm that the driver's voice
can be easily picked up at the selected location.
Microphone
Cable clamp
(Sold separately)
5
Remove the mounting sleeve from the main unit (see
"Removal" on page 99).
Slide the unit into the mounting sleeve and secure it.
Mounting Sleeve
Dashboard
(Included)
Pressure
1
Plates *
Face Plate*
1
* If the installed mounting sleeve is loose in the dashboard, the
pressure plates may be bent slightly to remedy the problem.
2
* The supplied face plate may be mounted.
This unit
2
(Included)
6
Reinforce the head unit with the metal mounting
strap (not supplied). Secure the ground lead of the
unit to a clean metal spot using a screw (*1) already
attached to the vehicle's chassis. Connect all the
leads of the INE-W927HD according to details
described in the CONNECTION section.
Hex Nut (M5)
Metal
Mounting
Strap
*
Ground Lead
• For the screw marked "*2," use an appropriate screw for the chosen
mounting location.
7
Slide the INE-W927HD into the dashboard until it
clicks. This ensures that the unit is properly locked
and will not accidentally come out from the
dashboard.
Removal
1. Insert the bracket keys into the unit, along the guides
on either side. The unit can now be removed from the
mounting sleeve.
This unit
2. Pull the unit out, keeping it unlocked as you do so.
Screw
2
*
Bolt Stud
1
This unit
Chassis
Bracket keys
(Included)
99
-EN