Selecting An Intersection As The Destination - Alpine INE-W927HD Quick Reference Manual

5. A full screen map appears with the selected point in the middle. If necessary, tap the map
somewhere else to modify the destination. The Cursor (
to confirm the destination, or tap
destination.
6. After a short summary of the route parameters, the map appears showing the entire route. The
route is automatically calculated. Tap
and start your journey.

3.1.1.6 Selecting an intersection as the destination

To enter an address as the destination, do as follows:
1. In the Navigation menu, tap the following buttons:
2. Select the country, state and city/town as described earlier (page 24).
3. Enter the street name:
a. Tap
b. Start entering the street name on the keyboard.
c. Find the street you need:
•
The most likely street name is always shown in the input field. To accept it, tap
.
•
If the desired name does not show up, the names that match the string appear in a
list after entering a couple of characters (to open the list of results before it appears
automatically, tap
to modify route parameters, or tap
,
(if you have selected a city/town above, this step is not needed).
). Select the street from the list.
33
) appears at the new location. Tap
to select a different
.