4
Press the p / q (arrow) buttons to select 2P White Balance and
press the OK button.
5
Press the p / q (arrow) buttons to select Red-Offset, Green-Offset,
Blue-Offset, Red-Gain, Green-Gain, or Blue-Gain.
6
Press the u (arrow) button.
7
Press the t / u (arrow) buttons to adjust.
10P White Balance:
1
Press the SETUP button.
2
Select Picture > Expert Picture Settings > White Balance >
Setting Type and press the OK button.
3
Press the p / q (arrow) buttons to select 10P and the press the OK
button.
4
Press the p / q (arrow) buttons to select 10P White Balance and
press the OK button.
5
Press the p / q (arrow) buttons to select IRE, Red, Green, or Blue.
6
Press the u (arrow) button.
7
Press the t / u (arrow) buttons to adjust.
Adjusting the audio
Muting the sound
Press the MUTE button to partially reduce (1/2 Mute) or turn off (Mute)
the sound. Each time you press the MUTE button, the mute mode
changes in the following order: 1/2 Mute, Mute, Volume, 1/2 Mute, etc.
NOTE
Selecting stereo/SAP broadcasts
The MTS (multi-channel TV sound) feature is only available for analog
signals on the ANT/CABLE input. When the TV receives a stereo or SAP
(second audio program) broadcast, the icon STEREO or SAP appears on
screen when the INFO button is pressed.
To listen in stereo sound:
1
Press the SETUP button.
2
Select Sound > MTS and press the OK button.
3
Press the p / q (arrow) buttons to select Stereo.
4
Press the EXIT button.
If you modify items in the Sound menu while Mute is active, Mute is
cancelled.
Picture and Sound Controls
Adjusting the audio
105