Toshiba 39L4300UM User Manual page 58

58
Initial Setup and Menu
Performing the initial setup
If some channels are not found after scanning:
Check the antenna/cable connections, and scan again.
❖
Connect the TV to the antenna or cable box directly and scan again.
❖
1
2
3
4
7 IR Blaster
Select Next or Skip.
❖
NOTE
Setting the IR Blaster
IR Blaster Setup
1
Device Type
1
Press the SETUP button. Select Installation > Quick Setup
and press the OK button.
A confirmation message appears.
Select Yes then press the OK button.
Repeat setup to step
If you selected Antenna previously, selecting Cable
❖
might be effective.
If you selected Cable previously, selecting Antenna
❖
might be effective.
Select Start Scan.
To start the IR Blaster setup, select Next on the screen, or to
skip the setup, select Skip. If you skip this setup, you can setup
the IR Blaster at any time through the Installation > IR Blaster
Setup menu.
The IR Blaster may not work with some devices, and it may not control
certain features on your external devices.
Select Add on the screen.
Device Type screen will appear.
Select Device Type, and use the t / u (arrow) buttons to select
a device type from the following:
Cable Box
❖
Satellite Box
❖
VCR
❖
Blu-ray, DVD Player
❖
Receiver, Misc Audio
❖
Amplifier
❖
CD Player
❖
Video Accessory
❖
6
(Channel Tuning).