Table of Contents
Advertisement
122
Picture and Sound Controls
Adjusting the audio
Adjusting the audio
Muting the sound
Press the MUTE button to partially reduce (1/2 Mute) or turn off (Mute)
the sound. Each time you press the MUTE button, the mute mode
changes in the following order: 1/2 Mute, Mute, Volume, 1/2 Mute, etc.
NOTE
Selecting stereo/SAP broadcasts
The MTS (multi-channel TV sound) feature is only available for analog
signals on the ANT/CABLE input. When the TV receives a stereo or SAP
(second audio program) broadcast, the icon STEREO or SAP appears on
screen when the INFO button is pressed.
To listen in stereo sound:
1
Press the SETUP button.
2
Select Sound > MTS and press the OK button.
3
Press the p / q (arrow) buttons to select Stereo.
4
Press the EXIT button.
NOTE
Adjusting the audio balance
You can adjust the audio balance.
1
Press the SETUP button.
2
Select Sound > Balance and press the OK button.
3
Press the t / u (arrow) buttons to adjust the balance.
4
Press the EXIT button.
Adjusting the range
You can adjust bass and treble.
1
Press the SETUP button.
2
Select Sound > Bass or Treble.
If you modify items in the Sound menu while Mute is active, Mute is
cancelled.
You can typically leave the TV in Stereo mode because it outputs the
v
type of sound being broadcast (stereo or monaural).
If the sound is noisy, select Mono.
v
If there is no sound in SAP mode, select Stereo.
v
Advertisement
Table of Contents
